![]() However, it is more expensive and lacks some of the clarity of standard lacquer.Ĭatalyzed lacquer is a so-called “ conversion finish“. CAB lacquer is an ideal finish for light-colored woods because it preserves the light color. It also has slightly better heat resistance and is less brittle. ![]() This finish has the same general properties of nitrocellulose lacquer, except it is much whiter and yellows less over time. It is sometimes labeled as CAB-acrylic lacquer. For these reasons, it is not the best choice for a kitchen table finish, especially one made from a light-colored wood and exposed to lots of direct sunlight (unless you like the yellow look).ĬAB lacquer is typically made from a mixture of a cellulose resin called cellulose acetate butyrate (CAB) and acrylic. However, it yellows badly with age and only provides moderate resistance to water, heat, abrasion, and certain solvents such as alcohol. Originally developed as a substitute for shellac, NC lacquer is attractive, sprays like a dream, and rubs out better than most other finishes. If the label on the can just says lacquer, it’s almost certainly nitrocellulose lacquer. Here are the main types of lacquer that are used for wood finishing: The amounts and types of these materials produce lacquers with varying degrees of flexibility, color, and resistance to water, acids, alkalis, solvents, and heat. Lacquer is made from cellulose derived from cotton or wood fibers that is combined with a plasticizer, a resin, and a blend of solvents and diluents. ![]() Professionals especially appreciate lacquer’s fast drying time - 3 to 4 coats in one day is easily achieved. It dries fast, has decent protective qualities, provides excellent clarity and depth, rubs out well, and is fairly easy to repair. Lacquer is a synthetic finish that has been the finish of choice in the furniture making industry since the 1920’s. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |